Usage examples for general industrial use spray guns
Mold department
Usage example : Release agent application
Spray gun : JJ-K-1.3
Used for application of release agent to mold for molded rubber products.
Thorough atomization maximizes the potential of liquid properties.
Usage example : Metal forming oil application
Spray gun : JJ-K-1.0
Used for application of oil to mold on molding machine. Because pinpoint application and volume adjustment are possible, oil can be economized.
Painting department
Usage example : Paint application
Spray gun : LUNA2-K (large surface), DEMl2-1.1 (small surface)
Used for painting furniture. Creates a smooth & fine surface finish with top-quality atomization.
Usage example : Anti corrosive agent application
Spray gun : JGX-502-2.0
Used for applying anti corrosive agent to steel beams. Because spraying with low air pressure, scattering and blowback are minimized.
Welding department
Usage example : Anti-spatter agent application
Spray gun : JJ-K-1.3
Used for applying anti-spatter agent application to parts of construction machines. Uniform application of thin film thickness is possible, shortening time for the next process and reducing failure ratio.
Usage example : Flaw detection chemicals application
Spray gun : LUNA2-K
Used for applying flaw detection chemicals to metalwork. Uniform application of thin film is possible, shortening time for the next process and reducing failure ratio.
Others
Usage example : Photocatalyst solution application
Spray gun : DEMl2-1.1
Used for application of photocatalyst solution indoors and outdoors (antibacterial, waterproofing, antifouling). The super compact size of the spray gun results in minimal scattering and economization of application liquid.
Usage example : Adhesive application
Spray gun : DA-300-1.8
Used for applying adhesives to tabletops. A high level of atomization results in thin, uniform coating.
